Black Box LWN600CM-1 Guida Utente Scaricare il pdf (Pagina 97)

724-746-5500 | blackbox.com

Page 97

Chapter 8: Basic Configuration Examples

CAPWAP traffic secured with DTLS

Note: The CAPWAP path to SmartPath AP3 really passes

through one of the portals (SmartPath AP1 or

SmartPathAP2) before reaching it.

SmartPath EMS VMA

Members of “cluster1-test”

SmartPath AP3

(Mesh Point)

SmartPath AP2

(Portal)

SmartPath AP1

(Portal)

WLAN Policy:

wlan-policy-test1

SSID: test1-psk

Cluster: cluster1-test

DHCP client: enabled

Credentials:

Name: testadmin1

Password: testpass1

SSID: test1-psk

Cluster: cluster1-test

DHCP client: enabled

Credentials:

Name: testadmin1

Password: testpass1

Members of “cluster 1 test”

Figure 8-10. SmartPath AP configuration assignments.

Assigning Configurations

1. Click “Monitor > Access Points > SmartPath APs (View mode: Config).”

2.BecauseyoucanonlysetradiomodesonindividualSmartPathAPs,clickoneoftheirnames,selectUseoneradio(2.4GHz)for

clientaccessandoneradio(5GHz)forameshlink,andthenclickSave.RepeatthisstepforalltheotherSmartPathAPsas

well.

3.TomodifyalltheSmartPathAPsatthesametime,selectthecheckboxintheheadertotheleftofHostName,whichselects

the checkboxes of all the SmartPath APs, and then click “Modify.”

The SmartPath APs > Modify (Multiple) dialog box appears.

4.FromtheWLANPolicydrop-downlist,choosewlan-policy-test1.ThisistheWLANpolicythatyoucreatedinSection8.3.Do

not modify any of the other basic settings.

5. In the Optional Settings section, expand Credentials, and then enter the following in the Root Admin Configuration section:

New Admin Name: testadmin1

 ThisistherootadminnamethatSmartPathEMSVMAusestomakeSSHconnectionsanduploadafullconfigurationto

managed SmartPath APs. The default root admin name and password is admin and blackbox.

New Password: testpass1

Confirm New Password: testpass1

Although changing the login credentials is not necessary, it is good practice, which is why it is included here. When you

are ready to deploy the SmartPath APs on your network, change the admin name and password again.

NOTE: To see the text strings that you enter, clear the Obscure Password check box.

6. Leave the other settings as they are, and then click Save to save your configuration and close the dialog box.

7. Check your settings in the SmartPath APs window (see Figure 8-11).

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 191 192

Commenti su questo manuale

Nessun commento

Black Box LWN600CM-1 Guida Utente Pagina 97

Commenti su questo manuale