Black Box V5.1 Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 20)

Euro MotoElectrics, 25958 Genesee Trail Road PMB 321 Golden, Colorado USA 80401 EDL-IGN Page 20 of 43

www.EuroMotoElectrics.com info@euromotoelectrics.com Tel: 1-303-526-0901

EnDuraSpark Electronic Ignition

Installation & Troubleshooting v5.1

If necessary, loosen the three set screws with the provided small

Allen wrench (part #4) so that the timing wheel can rotate on the

hub.

Step 16: Position Timing Wheel

Wheel Hub

Turn on the motorcycle’s ignition. With the

engine at TDC rotate the timing wheel

clockwise as viewed from the front of the

engine. As the wheel rotates, the LED on

the trigger plate will turn ON when the “S”

stamped on the wheel passes the trigger. It

will extinguish when the “N” on the wheel

passes the trigger.

Rotate the wheel a few revolutions to

see how this works. (If the LED doesn’t

come on, the wheel may need to be

pulled out of the hub 1 mm or so until it

does light).

Slowly rotate the wheel until the LED

just turns off. Tighten the 3 set screws.

LED

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Nessun commento

Black Box V5.1 Guida alla Risoluzione dei Problemi Pagina 20